is
ideal for a wide variety of sealing applications such as:
·Metal, Plastic & Glass-Lined Flanges
·Rough & Damaged Flanges
·Complex & Irregular Flanges
·Pump & Compressor Housing Flanges
·Manhole & Handhole Covers
·Heat Exchangers
·Misc. Lids,
·Misc. Ducts, etc.
·FORM-IN-PLACE
·100%
PTFE
·ASTM
TESTED
·EASY
INSTALLATION
Standard
Spools
Bulk
Spools
Width
Length
Part No.
Length
Part No.
Length
Part No.
Length
Part No.
1/8”
50 ft.
JS020060
100 ft
JS020100
600 ft
JS020500
1000 ft.
JS021000
3/16”
75 ft.
JS030075
150 ft.
JS030150
500 ft.
JS030500
750 ft
JS030750
¼”
25 ft.
JS040050
50 ft.
JS040100
250 ft.
JS040250
500 ft.
JS040500
3/8”
15 ft.
JS060025
30 ft.
JS060050
150 ft.
JS060150
250 ft.
JS060250
½”
15 ft.
JS080015
30 ft.
JS080080
100 ft.
JS080100
150 ft.
JS080150
5/8”
15 ft.
JS100015
30 ft.
JS100030
100 ft.
JS100100
150 ft.
JS100150
¾”
15 ft.
JS120015
30 ft.
JS120030
50 ft.
JS120050
100 ft.
JS120100
1”
15 ft.
JS160015
30 ft.
JS160030
50 ft.
JS160050
75 ft.
JS160075
Description
8900 PTFE Joint Sealant is a high-performance gasket
material made of 100%PTFE. It is a form-in-place gasket that conforms to almost
any sealing surface.It is capable of
withstanding a wider range of pressure, temperature and chemical environments
than any other soft gasket.PTFE Joint
Sealant is also easy to install and remove, making it a highly versatile and
cost-effective solution for many demanding sealing applications.
Features
Form-In-Place
– 8900 joint sealant conforms to any surface, including smooth, rough,
complex, pitted and damaged surfaces.
Chemically
resistant – made without fillers or binders, CSSI’s 100% PTFE joint
sealant exhibits the same chemical inertness of pure virgin PTFE.
Adhesive-Backed
- convenient adhesive strip and peel-off backing allow easy installation
on both horizontal and vertical surfaces.
8900 Joint Sealant has an UNLIMITED SHELF LIFE, shows NO
AGE DETERIORATION, and RESISTS CREEP
AND COLD FLOW.
Specifications & Testing
TemperatureRange
-450 °F to 600°F
FDA Suitable
PTFE to 21 CFR
177.1550
Adhesive to 21 CFR
175.105
PressureRange
F.V. to 3,000 psi
(F.V. to 210 Bar)
Independent
Laboratory Testing
ASTM F36 Compressibility
64-69%
pH Range
0-14
ASTM F38 Creep
Relaxation
Pressure x Temperature
(psi x °F), max
3500,000
In-House Testing
5,500 psi Hydraulic
Pressure Test
3/16” Material – 72
hrs without leakage
MADE IN THE
USA
.
8900 Joint Sealant and all raw materials are MANUFACTURED in the
USA
.
