Temperature: To 1200°F (650°C) - Steam
Temperature: To 850°F (455°C) - Atmosphere
pH: 0-14 except strong oxidizers
Speed: 4000 FPM
Pressure: To 3000 PSI (200 bar)
Construction: Interlock Braid
Braided from pure expanded graphite. It is resilient, self lubricating, chemically inert and thermally conductive. 1200FGTP can be used in both pumps and valves in a wide range of service conditions.
Braided from a combination of expanded flexible graphite
(1200FTGP) and high strength carbon fibers. Carbon fibers are
braided into the corners to provide anti-extrusion and better
abrasion resistance in tough applicaitons. Can give virtually leak
free performance. 1200CR was independantly fire tested to API 589
at API 607 temperatures and pressures.
Graphite filled PTFE fiber with excellent thermal
conductivity and will not harden. An economical substitute
for Style 2851.
In.
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
ft./lb.
69
36
21
14
10
7
5.7
4.5
3.5
2.5
1.9
1.5
lbs./box
1
1
2
2
2 or 5
5
5
5
5
10
10
10
REGAL Style 2600
Temperature: To 500°F (260°C)
pH: 0-12
Speed: 2200 FPM
Pressure: To 500 PSI (35 bar)
Construction: Interlock Braid
Special syntex fiber, with each strand impregnated with
PTFE dispersion both prior to and after braiding. Finished
packing also has a break-in lubricant. An asbestos
replacement packing for general service applications.
Good chemical resistance.
Unique packing combining 2600 fibers. Aramid
corners prevent roll and extrusion. Well suited for abrasive
applications and end rings with other packings.
In.
1/8"
3/16"
1/4"
5/16"
3/8"
7/16"
1/2"
9/16"
5/8"
3/4"
7/8"
1"
ft./lb.
N/A
N/A
25
17
11.7
8.8
6.8
5.7
4.2
3.2
2.1
1.6
lbs./box
N/A
N/A
2 or 5
2 or 5
2 or 5
5
5
5
5
10
10
10
REGAL Style 2830GS
Temperature: To 500°F (265°C)
pH: 4-10
Speed: 1500 FPM
Pressure: To 300 PSI (20 bar)
Construction: Interlock Braid
Syntex fiber packing thoroughly impregnated with a high
temperature lubricant. Finished packing is surface
graphited. An asbestos replacement packing for general
service use on pumps and valves.
Braided from a combination of expanded flexible graphite
and inconel wire. 1200 I retains dimensional stability in high
temperature, high pressure environments, and can meet
most VOC emission control regulations. 1200 I was
independantly fire tested to API 589 at API 607
temperatures and pressures.
Carbon yarn packing impregnated with graphite dispersion. For
severe services in pump and valve applications, including superheated
steam, acids, alkalis, etc.